Filter
Top Products
ENGLISH
Basic Operation 3
54
Tone Control
1. Press the TONE MODE button.
"TONE OFF" or "TONE ON" appears on the display.
<
If no button is pressed for 5 seconds, the tone mode will be
cancelled.
<
The TONE MODE button will not work when 7CH DIRECT is
selected.
2. If the tone mode is off, press the SELECT button to turn it on.
3. Press the TONE MODE button to select "BASS" or "TRBL".
Each time the TONE MODE button is pressed, the mode is
changed as follows :
To adjust the level of low frequency sound range, select
"BASS".
To adjust the level of high frequency sound range, select
"TRBL (treble)".
4. Press the LEVEL buttons to change the setting.
The level can be adjusted in 2 dB steps from -10 to +10.
<
If you want to turn off the tone mode, select "TONE ON" and
press the SELECT button to turn it off. "DIRECT" indicator
lights.
<
Tone control does not work when the digital signals of DTS
or Dolby Digital are input, or when 7CH DIRECT is selected.
Dimmer
You can dim or turn off the front panel's display by pressing
the DIMMER button:
<
When the display is turned off, pressing any button will turn
the display on.
<
This function will be cancelled when the STANDBY/ON or
the POWER switch is pressed.
<
When you set the sleep timer, the display is dimmed
automatically.
Sleep Timer
The power can be switched off after a specified amount of
time.
Press the SLEEP button repeatedly until desired time
appears on the display.
SLEEP 10 (20, 30, 60, 90):
The power will be switched off 10 (20, 30, 60 or 90) minutes
later.
Normal display: the sleep timer is off.
When you set the sleep timer, the display is dimmed, and the
remaining time is displayed.
H
G
F
G
H
F
BASS TRBL TONE ON