Filter
Top Products
ENGLISH
Remote Control Unit 3
A
36
Using a Punch-through Function
This remote control unit may be programmed to operate either
"RECEIVER volume punch-through" or "TV volume and/or TV
channel punch-through" in conjunction with any of the eight
components controlled by this remote control unit.
For example, since this receiver will likely be used as the
sound system controller while watching TV, you may want to
adjust this receiver's volume although this remote control is
set to control the TV. Controlling the Receiver volume level
while the remote is set to operate the TV is referred to a
"Punch-Through".
RECEIVER volume punch-through:
To program "RECEIVER volume punch-through", press and hold
down both the RECEIVER button and the VOLUME(+) button for
more than 1 second.
To delete the punch-through, press and hold down both the
RECEIVER button and the VOLUME(-) button for more than 1
second.
TV volume punch-through:
To program "TV volume punch-through", press and hold down
both the TV button and the VOLUME(+) button for more than 1
second.
To delete the punch-through, press and hold down both the TV
button and the VOLUME(-) button for more than 1 second.
TV channel punch-through:
To program "TV channel punch-through", press and hold down
both the TV button and the CHANNEL(+) button for more than 1
second.
To delete the punch-through, press and hold down both the TV
button and the CHANNEL(-) button for more than 1 second.
<
If programming or deleting is performed successfully, the LED
will flicker twice.
<
If you want to delete all punch-through functions, press and
hold down both the RECEIVER button and the AUTO button for
more than 1 second :
Note:
You can program only one "volume punch-through". Program
either "RECEIVER volume punch-through" or "TV volume punch-
through".
D
C
B
A
B
C
D