Filter
Top Products
ENGLISH
Speaker Configuration 1
1
40
It is important to perform speaker configuration prior to using the
unit.
To enjoy multi-channel surround sound, such as 5.1, you need 5
speakers (Front Left, Center, Front Right, Surround Right,
Surround Left) and a powered sub-woofer.
In addition to above, you will need a surround back speaker for
6.1 channel surround sound.
<
When no action is taken for 8 seconds, the Speaker Setup
mode will be cancelled.
Press the POWER switch.
The unit enters standby mode, and the STANDBY indicator
lights.
Press the STANDBY/ON switch to turn the unit on.
The STANDBY indicator goes off.
Press the SPEAKER SETUP button.
One of the speaker settings such as "FL-CL-SL" appears on the
display.
Each time the SPEAKER SETUP button is pressed, the mode is
changed as follows:
3
2
1
1 2 54
3
2
3
4
5
< The SPEAKER SETUP button will not work when the SPEAKER
button is set to off. In that case, press the SPEAKER button to
turn the speakers on and then press the SPEAKER SETUP
button.
<
The SPEAKER SETUP button will not work when 7CH DIRECT is
selected. In that case, press the 7CH DIRECT button to turn it
off and then press the SPEAKER SETUP button.
Press the SELECT buttons to change the setting.
For details of each setting, see page 42 to 44.
Repeat step and to set other configurations.
When all the configurations has been finished, press the
MEMORY button (or the ENTER button of the remote control
unit) to save the changes and exit the Speaker Setup mode.
Be sure to press the MEMORY button, or the changes will be
cancelled.
5
43
4
speaker size setting
surround back speaker setting
sub-woofer setting
distance (front)
distance (center)
distance (surround)
Virtual Surround Angle