Filter
Top Products
Channel
In this line, select the television channel/station on which you
wish to record a programme:
> If necessary, use the arrow keys to mark the
Channel.
> Press OK. A programme list will be displayed.
> Use the arrow keys to mark the desired programme.
> Confirm by pressing OK.
The selected programme will now be accepted into the
timer menu.
Date
> Use the arrow keys to mark the item Date.
> Use the numeric keys to enter the recording date.
Start
> Use the arrow key right to select the item Start.
> In this line use the numeric keys to enter the starting
time.
Stop
> Repeat the steps as described under “Start” to enter
the stop time, or end of programme.
So that all events can be included, there should be an
interval of at least one minute between the stop time of a
timer event and the starting time of the next timer event!
Repeat (optional)
> Use the arrow key right to mark the item Rep.
> Press OK.
A selection window will be displayed, offering various
repeating suggestions.
1x Timer on
D Daily repeat
1xW Repeat once a week
1-5 Repeat only on weekday
6-7 Repeat only on weekends
> Use the arrow keys up/down to select the desired
function.
> Press OK to accept the setting into memory.
> When you have completed the programming, press
the yellow function key (Accept) to accept and store
the data in memory.
> Press the TV/Radio key to return to normal
operation.
Type
> Use the arrow key right to mark the item Type.
> Use the OK key to enter the required type in this line.
VCR
Your receiver will be switched on resp. off for the
selected programme. If the receiver is switched on by
means of the timer, most of the functions of the remote
control are disabled, as a safety precaution to prevent
22
bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 22