Filter
Top Products
7.1.4 Sorting programmes
To sort the programmes on your Favourites list in the order
you prefer, proceed as follows:
> Press OK to display the Favourites list.
> Press the blue function key (Change) to go to the
programme list
(Fig. 7-5).
> Use the arrow keys up/down to mark the programme
you wish to place at a different position in the list.
> Press the yellow function key to select the Sort
function.
A double arrow will be displayed next to the
programme selected.
> You can now position the selected programme at any
desired position in the programme list, using the arrow
keys up/down or the numeric keys.
> Press the yellow function key (Save) to store the
programme at the new position.
To mark several programmes simultaneously, proceed
as follows:
> Press OK to go to Select mode.
The selected programme will now be indicated by a
cross in the left margin.
> Now, use the arrow keys up/down to select additional
programmes of your choice.
> When you have completed marking programmes in
this manner, press the yellow function key (Sort).
> You can now use the arrow keys up/down and/or the
numeric keys to move the marked programmes to the
desired position in the programme list.
> Press the yellow function key (Save) to store the
programmes at the new position.
> When you have completed configuring the programme
list according to your preferences, press the Back key
twice to return to normal operation.
7.1.5 Blocking access to programmes (parental
control)
You have the facility to block access to any programme. A
blocked programme can only be displayed on screen if the
personal PIN code is entered after the programme has been
selected. Once this code has been entered, the programme
remains unblocked for the entire viewing session, i.e. until it is
switched off, resp. switched into standby mode.
To block access to a programme, proceed as follows:
> Press OK to display a programme list.
> Press the blue function key (Change).
> Now use the arrow keys up/down to mark the
programme to which you wish to block the access.
26
(Fig. 7-5)
bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 26