Filter
Top Products
Polarisation
> Use the arrow keys up/down to mark the item
Polarisation.
> Use the OK key to enter the polarisation plane
(horizontal or vertical) on which the desired
programme is broadcast.
> Press the green function key to decide whether you
wish to search only for free-to-air programmes (Free
programmes) or whether you wish to include encryp-
ted programmes (All programmes) in the search.
> Press the red function key (Start search) to commence
the search..
The search will be started. Please note any
information displayed on your screen.
> The search procedure can be stopped by again
pressing the red function key.
7.4.3 Manual search
If you are unable to find a programme using the search
methods as described under Points 7.4.1 and 7.4.2, it may be
necessary to enter additional unique. and programme-specific
PID numbers. These numbers can be found in the Internet, or
you can contact the respective programme providers for this
information.
To perform a manual search, call up the menu Search
Manual Search.
(Fig. 7-11)
> Use the arrow keys up/down to select the menu item
Manual Search.
> Confirm by pressing OK.
The menu >Search>Manual Search will be
displayed.
The menu differs from the menu Transponder only with
respect to the menu items PCR PID, Audio PID and
Video PID.
> Proceed as described under Point 7.4.3.
> Use the arrow keys up/down to mark the lines PCR
PID, Audio PID and Video PID, then use the
numeric keys to enter the corresponding numbers.
7.4.4 Integrating programmes after a search
As the search of one or more transponders progresses, you
can follow this on the screen. When the search has been
completed, the number of transponders found, will be display-
ed. In addition, you will be asked by the display
(Fig. 7-12)
whether you wish to integrate the programmes found automa-
tically in the TV or radio programme lists. If you wish to incor-
porate the programmes automatically, you can decide
whether they should be added to the Favourites list in sor-
ted or unsorted order.
30
(Fig. 7-11)
(Fig. 7-12)
bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 30