Filter
Top Products
> Use the green function key to select the function
Parental Control.
A key symbol will be displayed next to the selected
programme.
> Repeat this procedure until you have blocked access
to all the programmes you wish to mark in this way.
> When you have completed configuring the programme
list according to your preferences, press the Back key
twice to return to normal operation.
> To activate the parental control function, you must now
enter your personal PIN code in the Point Changing
PIN, you must then activate the parental control
function as described in Point 5.2 (Basic Settings).
7.2 Changing the PIN
The Pin code is set at the factory (default value) to 0000. In
order to activate the parental control feature, you must input
your own personal PIN code instead of the default setting.
Note! Be sure not to forget your PIN code. If this
should happen, consult your specialist retailer!
To change the PIN code proceed as follows:
> Press the Menu key to display the Main Menu.
> Use the arrow keys up/down to mark the item
Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Use the arrow keys up/down to mark the item
Change Unit PIN.
> Confirm by pressing OK. The menu Change Unit
PIN will be displayed.
(Fig. 7-6)
.
> Now use the numeric keys to enter the current PIN
code (default setting 0000).
> Use the numeric keys to enter the new PIN code you
have chosen.
> Repeat entry of the new code.
> You have completed changing the PIN code. Press
Back twice to return to normal operation.
Please note that you must still activate the parental control
function as described under Point 7.3.
7.3 Unblocking access control for individual
programmes
To delete the parental control function for individual
programmes, proceed as described under Point 7.1.5. Press
the blue function key (Change), then enter the appropriate
PIN code. Select the programme you wish to unblock, and
remove the access control by pressing the green function
key (Parental Control).
27
(Fig. 7-6)
bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 27