Filter
Top Products
2.4 Connecting the digital receiver 11
11
⃝
RF OUT Analog television output socket.
12
⃝
S/PDIF Dolby Digital output socket for the au-
dio system.
13
⃝
USB USB port for firmware update and data
transfer.
14
⃝
RS-232 Serial port for firmware update and data
transfer.
Table 2.3: Connectors specification
TV SCART CVBS/ S-Video/ RGB/YUV video output
Left & right audio output
VCR SCART CVBS video output
Left & right audio output
CVBS /S-Video /RGB/ YUV video input for bypass
Left & right audio input for bypass
S-Video S-Video output
RCA AV Composite video output
Left & right audio output
S/PDIF Dolby Digital audio output
RS-232 9 pin D-sub type
Transfer rate: 115.2kbps at maximum
USB 2.0 Device
2.4 Connecting the digital receiver
There are several ways to install the digital receiver as de-
scribed below. Install the digital receiver suitably to your tele-
vision and other appliances. If you have any problem with
your installation or need a help, contact your dealer or service
provider.
You should configure audio and video settings after installa-
tion. For detailed descriptions about audio and video settings,
refer to § 3.2.