Filter
Top Products
40 Recording and Playing Back
current recording will be stopped the moment the current pro-
gram ends; likewise, once the After next program option is se-
lected, the current recording will be stopped the moment the
next program ends.
Selecting the Record pause command pauses recording. When
you press button again to display the recording control
box, the Record continue command is displayed instead. Se-
lecting the Record continue command resumes recording.
To stop recording, press
button. Then a confirmation
box like the next figure appears,
which shows the information of
programs being recorded at the
moment. Select a program you
want to stop.
After a recording is started, you can switch over to and watch
any other service during the recording. To record another ser-
vice additionally, switch over to a service you want to record,
and press button.
Once a recording is started, it is put on the recording file list
even though it is not finished yet. The recording file is named
after its service name with a suffix of a number. To display the
recording file list, press button. For detailed description
about the recording file list, refer to § 7.2.
7.1.2 Making a timer recording
You can make a program to be recorded at a specific time.
Even If the digital receiver is off, it will be turned on and
start recording at a time specified. The digital receiver will
be turned off again as the recording ends.