Filter
Top Products
7.1 Recording a program 39
7.1 Recording a program
Circle
Once a recording is started, a recording symbol like
the next figure will be displayed on the right top of
the screen for a few seconds. When you are watch-
ing a service different from the service being recorded, you
can view a number on the center of the symbol, which indi-
cates the order that the recording is started. The outer circle of
the recording symbol indicates progress rate.
NOTE When a recording is finished, it might not be saved if
its recording duration is less than 1 minute.
7.1.1 Immediate recording by the remote control
To record a program you are watching at present, press
button.
To pause recording, press button. To resume it, press
button again.
After a recording is started,
pressing displays a record-
ing control box like the next fig-
ure, in which you can specify
its duration on which it will be
ended.
A current recording will be stopped after the time set to the
Duration parameter. If the information about the next pro-
grams is provided through the electronic program guide, the
After this program and After next program options would be
available. Once the After this program option is selected, the