Filter
Top Products
23
Using the TV’s features (General)
Using the stable sound
The Stable sound function limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV programme switches to
a commercial).
1 Press M, then press Y or Z to display the SOUND menu.
2 Press V or U to select Stable sound on the 2nd page.
3 Press Y or Z to select On or Off.
Note:
The Stable sound effect is active only when the sound outputs
from the speaker.
Using the bass boost
1
From the SOUND menu, press V or U to select Bass
boost on the 2nd page.
2 Press Y or Z to select On.
3 Press V to select Bass boost level.
4 Press Y or Z to adjust the Bass boost level.
5 To turn off the Bass boost, press V or U to display Bass
boost, then press Y or Z to select Off.
Note:
The Bass boost effect is active only when the sound outputs
from the speaker.
Other feature settings
Activating blue screen
With the blue screen function On, the screen will
automatically turn blue and the sound will be muted when no
signal is being received.
1 Press M, then press Y or Z to display the FUNCTION
menu.
2 Press V or U to select Blue screen.
3 Press Y or Z to select On or Off.
Note:
In the PC input mode (- page 25), this function is not
available.
Activating the 4:3 stretch
When 4:3 stretch is activated, this function will switch 4:3
format programmes into a full screen picture.
1 From the FUNCTION menu, press V or U to select 4:3
stretch.
2 Press Y or Z to select On or Off.
Note:
In HDMI signal format, this function is available.
Adjusting the brightness of side panel
You can adjust the brightness of side panel in 14:9 or 4:3, etc.
mode.
1 From the FUNCTION menu, press V or U to select
Side panel.
2 Press Y or Z to adjust the settings as required.
Setting the Time zone - digital only -
This function allows you to manually set the time zone and
override the location that you have chosen during Auto Scan.
This is to be used when you move out of Australia to country
with different time zone. Please note that if you manually
change the time zone setting, all existing entries in the
programme timer will become invalid as they are still based on
the old time zone. It is recommended that you delete all the
entries in the programme timer before proceeding with steps
described below.
1 From the PROFILE menu, press V or U to select Time
zone.
2 Press Y and Z to select the local time zone.
MENU
Back Watch TV
EXIT
SOUND 2/2
Stable sound
Off
Bass boost
Off
Bass boost level
MENU
Back Watch TV
EXIT
SOUND 2/2
Stable sound
Off
Bass boost
On
Bass boost level
70
FUNCTION
MENU
Back Watch TV
EXIT
Teletext
Auto
Teletext language
1
Auto format
Blue screen
Side panel
On
On
1
4:3 stretch
Off
Side panel
1
PROFILE
Audio Preference
Time Format
Time zone
DIGITAL SETTINGS
24 hr
Back Watch TV Select Function
Transparency
I-Plate Display Time
GMT +08:30
1 sec
70