Filter
Top Products
22
Using the TV’s features (General)
1 Press M, then press Y or Z to display the SOUND
menu.
2 Press V or U to select MTS, then press Y or Z to select
Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual programme, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular programme on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch S to e Mono (monaural) (- page 22).
Selecting the dual 1 or dual 2 mode
- analog only -
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programmes are received.
1 Press M, then press Y or Z to display the SOUND
menu.
2 Press V or U to select Dual, then press Y or Z to select
Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the Dual menu is
not selectable.
• The Dual menu setting status remains even if the TV is
turned off.
Selecting the stereo programmes - analog only -
1 When a stereo programme is received, d Stereo
appears.
2 Press S to select the stereo/monaural mode. d Stereo
and e Mono appear cyclically on the screen.
Selecting the bilingual programmes
- analog only -
1 When a bilingual programme is received, j Dual
appears.
2 Press S to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
1
From the SOUND menu, press V or U to select an item
you want to adjust.
2 Press Y or Z to adjust the settings as required.
Using the SRS WOW
®
surround sound
SRS WOW
®
is a special combination of SRS Labs audio
technologies that creates a thrilling surround sound experience
with deep, rich bass from stereo sound sources. Your TV’s
audio will sound fuller, richer and wider.
WOW
®
consists of three features; SRS 3D
®
, SRS FOCUS
®
,
and SRS TruBass
®
, being turned on.
1 From the SOUND menu, press V or U to select WOW,
then press Q.
2 Press V or U to select an item you want to adjust, then
press Y or Z to adjust the settings as required.
SRS 3D: To turn the surround effect On or Off.
FOCUS: To turn the vocal emphasis effect On or Off.
TruBass: To select the desired bass expansion level
(Off, Low or High).
Notes:
• If the broadcast is monaural, the SRS 3D
®
effect does not
work.
• WOW, SRS and l symbol are trademarks of SRS Labs,
Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
• The SRS WOW
®
effect is active only when the sound outputs
from the speaker.
Dual
MTS
SOUND 1/2
MENU
Back Watch TV
EXIT
Auto
Dual 1
Treble
Bass
0
0
0
Balance
WOW
OK
Stereo
Dual 1
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j Dual 1 Sub I sound Main sound
J Dual 2 Sub II sound Sub sound
e Mono Main sound —
Selection Y Pressing Z
Bass weaker stronger
Treble weaker stronger
Balance decreases the right
channel
decreases the left
channel
Bass 0
MENU
Back Watch TV
EXIT
WOW
TruBass
High
SRS 3D
Off
FOCUS
On