Filter
Top Products
56
LZ196 (E/F) Web 213:276
Chapter 6: Using the TV’s advanced features
Using CableClear
®
digital noise reduction
The CableClear
®
digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To change the CableClear settings:
1 Press Y and open the Video menu.
2 Highlight Noise Reduction and press T.
3 In the CableClear field, select your desired setting.
Note:
• If the current input is ANT 1, ANT 2, VIDEO 1, or
VIDEO 2, the menu will display the text “CableClear.”
The available selections are Off, Low, Middle, High,
and Auto.
• If the current input is ColorStream HD1, ColorStream
HD2, or HDMI, the menu will display the text “DNR.” The
available selections are Off, Low, Middle, High, and
Auto. Auto will react proportionally to the strength of
the noise. Low, Middle, and High will reduce the noise
in varying degrees, from lowest to highest, respectively.
4 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Using MPEG noise reduction
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High.
Off is automatically selected when this feature is disabled
(“grayed out”).
To select the MPEG noise reduction level:
1 Press Y and open the Video menu.
2 Highlight Noise Reduction and press T.
3 Press B or b to highlight the MPEG Noise Reduction
field, and then press C or c to select either Off, Low,
Middle or High.
4 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
CH RTNENTER
EXIT
Navigate
Select
Back Exit
Mode Preference
Off
Picture Settings
Noise Reduction
Color Management Pro
Game Mode
Theater Settings
Video
Done
Noise Reduction ANT 1
Reset
CableClear
Auto
Low
MPEG Noise Reduction
Done
Noise Reduction ANT 1
Reset
CableClear
Auto
Low
MPEG Noise Reduction
LZ196_EN.book Page 56 Tuesday, August 1, 2006 6:04 PM