Filter
Top Products
Toshiba 42/46XV550A
21
Using the TV’s features (General)
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
- analogue only -
Auto mode
The MTS Auto mode automatically recognizes stereo/
bilingual programmes depending on the broadcast signal.
1 Press M, and then press Y or Z to display the SOUND
menu.
2 Press V or U to select MTS, and then press Y or Z to
select Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual programme, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular programme whose
channel reception is usually good, try setting MTS mode to
Auto, then switch S to e Mono (monaural) (- page 21).
Selecting Dual 1 or Dual 2 mode - analogue only -
You can hear only Dual 1 or Dual 2 sound, when bilingual
programmes are received.
1 Press M, and then press Y or Z to display the SOUND
menu.
2 Press V or U to select Dual, and then press Y or Z to
select Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the Dual menu is
not selectable.
• The Dual menu setting status remains even if the TV is
turned off.
Stereo and Bilingual transmissions
For ATV programmes
If stereo or dual language broadcasts are transmitted, the word
Stereo or Dual will appear on the screen each time positions
are changed, disappearing after a few seconds. If the broadcast
is not in stereo, the word Mono will appear.
Stereo… Press S to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word Dual will display. Choose the desired
channel number, and if the word Dual appears, press S to
select Dual 1, Dual 2, Mono (NICAM) or Dual 1 or Dual 2
(German stereo/bilingual broadcast).
For DTV programmes
For stereo or dual mono broadcasts, press S and use Y or Z
to select settings.
Adjusting the sound quality
1
From the SOUND menu, press V or U to select the item
you want to adjust.
2 Press Y or Z to adjust the settings as desired.
Using SRS WOW
®
surround sound
SRS WOW
®
is a special combination of SRS Labs audio
technologies that creates a thrilling surround sound experience
with deep, rich bass from stereo sound sources. Your TV’s
audio will sound fuller, richer and wider.
WOW
®
consists of three features; SRS
®
3D, SRS FOCUS
™
,
and SRS TruBass
®
.
1 From the SOUND menu, press V or U to select WOW,
and then press Q.
2 Press V or U to select an item you want to adjust, and
then press Y or Z to adjust the settings as required.
SRS 3D: To turn the surround effect On or Off.
FOCUS: To turn the vocal emphasis effect On or Off.
TruBass: To select the desired bass expansion level
(Off, Low or High).
0
0
0
SOUND
Dual
MTS
Treble
Bass
Balance
WOW
Dynamic Range Control
Stable Sound
Dual 1
Auto
Off
Off
0
0
0
SOUND
Dual
MTS
Treble
Bass
Balance
WOW
Dynamic Range Control
Stable Sound
Dual 1
Auto
Off
Mode Display Pressing Z
d Stereo Stereo S Left S Right
j Dual mono Dual 1 S Dual 2 S Dual
e Mono —
Surround —
Selection Y Pressing Z
Bass weaker stronger
Treble weaker stronger
Balance decreases the right
channel
decreases the left
channel
WOW
SRS 3D
TruBass
FOCUS
Off
On
High
Asia_4246XV550A.book Page 21 Tuesday, September 16, 2008 3:03 PM