Filter
Top Products
Toshiba 42/46XV550A
31
Other Digital TV features and settings
Parental Setup
The Parental Control feature allows you to block programmes
according to their rating levels. If a PIN has been set, you will
need to enter it before adjusting the level.
1 From the DTV Settings menu, press V to select
Parental Control.
2 Press Y or Z to choose the Parentat Setup options
(None, Block All, Block G and Above, Block PG
and Above, Block M and Above, Block MA and
Above, Block AV and Above, Block R and
Above).
To view blocked programmes, enter the PIN.
To reactivate the Parental Control, turn the TV off and
then on again.
Local Time Settings
This function allows you to manually set the time zone and
override the location that you have chosen during Auto Scan.
Please note that if you manually change the time zone setting,
all existing entries in the programme timer will become invalid
as they are still based on the old time zone. It is recommended
that you delete all the entries in the programme timer before
proceeding with the steps described below.
1 From the DTV Settings menu, press V or U to select
Local Time Setting.
2 Press Q, and then press V or U to select Time Zone.
3 Press Y or Z to select the item you want to set.
(New South Wales, Northern Territory,
Queensland, South Australia, Tasmania,
Victoria, Western Australia, Australian Capital
Territory)
4 Press V to select Time Offset, and then press Y or Z to
set as required.
Digital Output Format
1 From the SETUP menu, press V or U to select AV
Connection, and then press Q.
2 Press V or U to select Digital Output.
3 Press Y or Z to select Auto or PCM
Auto: Select this when an amplifier equipped with a
built-in Dolby Digital or MPEG decoder is
connected to the TV.
PCM: Select this when a 2ch digital stereo amplifier is
connected to the TV. When you select a Dolby
Digital or MPEG audio track, the sound is
converted to the PCM (2ch) format and output.
Note:
Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby
Laboratories.
Dynamic Range Control
This feature allows control of audio compression for digital
TV programmes excluding those with MPEG-1 and MPEG-2
audio.
When using Dynamic Range Control for Dolby Digital
sound, Audio Level Offset is available to adjust the sound
level. Using this function can reduce the difference in sound
level between MPEG-2 and Dolby Digital audio.
1 Press M and press Y or Z to select the SOUND menu.
2 Press V or U to select Dynamic Range Control, then
press Y or Z to select On or Off.
3 Press V or U to select Audio Level Offset.
4 Press Y or Z to adjust the Audio Level Offset from
–11 to 0. This setting will be applicable to Dolby Digital
audio.
Note:
If the Stable Sound and Dynamic Range Control features are
both set to On, the effects of each function may not be
noticeable.
Parental Setup None
Parental Control
Local Time Setting
Time Zone
Time Offset
New South Wales
11:29
AV Connection
PC/HDMI1 Audio
HDMI Settings
HDMI1 Audio
Digital Output
Auto
Auto
HDMI1
-5
Dynamic Range Control
Dynamic Range Control
On
Audio Level Offset
Asia_4246XV550A.book Page 31 Tuesday, September 16, 2008 3:03 PM