Filter
Top Products
Toshiba 42/46XV550A
25
Using the TV’s features (General)
Using REGZA-LINK
This feature uses CEC (Consumer Electronics Controls)
technology and allows the control of Toshiba REGZA-LINK
compatible devices from the TV remote control via HDMI
connection (- page 38).
Note:
Not all Toshiba products currently support REGZA-LINK.
REGZA-LINK Setup
1
Press M and Y or Z to select the REGZA-LINK menu.
2 Press V or U to select Enable REGZA-LINK, and then
press Y or Z to select On.
Note:
If you set Enable REGZA-LINK to Off, then all other items
will be greyed out.
3 Press V or U to select the REGZA-LINK set up item you
want to use, and press Y or Z to select On/Off or the
desired speakers mode.
• TV Auto Power On: On/Off
• Auto Standby: On/Off
• Amplifier Control: On/Off
• Speaker Preference: TV Speakers/Amplifier
REGZA-LINK one touch play
When a connected device is switched on, REGZA-LINK will
automatically switch the TV to the appropriate HDMI input.
Also, if the TV is in standby, it will be switched on
automatically.
These functions can be enabled or disabled from the REGZA-
LINK setup.
Note:
Even if the device is only showing a menu, the TV may
automatically switch to that input source.
REGZA-LINK system standby
This feature automatically puts the connected device into
standby when the TV goes into standby and vice versa.
REGZA-LINK system audio control
Using the Speaker Preference feature allows the TV remote
control to adjust the volume or mute the sound of the speakers
connected to the TV via an AV amplifier.
Ensure that the connected AV amplifier and REGZA-LINK
device are selected in the input source selection and that
Speaker Preference is set to Amplifier in the REGZA-
LINK setup menu.
Notes:
• When you turn on the AV amplifier, change its input source,
or adjust the sound volume, the sound will be output from
the AV amplifier’s speakers even if TV Speakers has been
selected for Speaker Preference. Turn the TV first to
standby and then on again to output the sound from the TV
speakers.
• The proper function may not work when operating the AV
Amplifier.
REGZA-LINK functions
When Enable REGZA-LINK is set to On, the following
functions can be enabled by setting them to On.
TV Auto Power On
The TV Auto Power On setting allows the TV to be
automatically switched on if a REGZA-LINK device is turned
on.
Auto Standby
If Auto Standby is enabled, the TV, when switched off, will
automatically switch off (put into standby mode) all connected
REGZA-LINK devices.
Amplifier Control
When Amplifier Control is set to On, it allows the “Speaker
Preference” feature to become available.
Speaker Preference
This feature allows the Speaker Preference to be set to TV
Speakers or Amplifier. The Amplifier option allows the
remote control to adjust or mute the volume of the external
audio.
Notes:
• When you turn on the Amplifier, change its input source, or
adjust the sound volume, the sound will be output from the
Amplifier’s speakers even if TV Speakers has been
selected. Turn the TV to standby and then on again to output
the sound from the TV speakers.
• The above functions are dependent on the connected
device and TV setting.
REGZA-LINK
Enable REGZA-LINK On
TV Auto Power On
Auto Standby
Amplifier Control
Speaker Preference
On
On
On
TV Speakers
Note:
The above functions are dependent on the connected device
and TV setting.
Asia_4246XV550A.book Page 25 Tuesday, September 16, 2008 3:03 PM