Filter
Top Products
Toshiba 42/46XV550A
34
Connecting your TV
Connecting an HDMI or a DVI device
•When turning on your electronic components, turn on the
TV first, and then the HDMI or DVI device.
•When turning off your electronic components, turn off the
HDMI or DVI device first, and then the TV.
•This TV may not be compatible with features and/or
specifications that may be added in the future.
•This TV is only operable with L-PCM on 32/44. 1/48 kHz
and 16/20/24 bits. If there is no sound when using HDMI,
use the analogue audio cables to connect the TV and the
HDMI device and select Analogue for HDMI1 Audio of
the AV Connection menu (- page 35)
.
Connecting an HDMI or a DVI device
The HDMI input on your TV receives digital audio and
uncompressed digital video from an HDMI device or
uncompressed digital video from a DVI device.
This input is designed to accept HDCP programme material in
digital from CEA-861-D compliant consumer electronic
devices (such as a set top box or DVD player with HDMI or
DVI output).
The HDMI input is designed for best performance with 1080i
(50 Hz/60 Hz), 1080p (24Hz/50Hz/60Hz) high-definition
video signals, but will also accept and display 480i, 480p, 576i,
576p and 720p (50 Hz/60 Hz) signals.
• HDMI: High-Definition Multimedia Interface
• DVI: Digital V
ideo Interface
• HDC
P: High-bandwidth Digital Content Protection
• CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for
reception of high-definition video signals. Because this is an
evolving technology, it is possible that some devices may
not operate properly with the TV.
• E-EDID: Enhanced-Extended Display Identification
• Acceptable PC signal format:
VGA: VESA 640 5 480 @ 60/72/75 Hz
S-VGA: VESA 800 5 600 @ 60/72/75 Hz
XGA: VESA 1024 5 768 @ 60/70/75 Hz
W-XGA: VESA 1280
5 7
68 @ 60/75 Hz
W-XGA: VESA 1360 5 768 @ 60 Hz
S-XGA: VESA 1280 5 1024 @ 60/75 Hz
However, these signal formats are converted to match the
number of pixels of the LCD panel.
Therefore, the TV may not display small text properly.
• L-PCM: Linear-Pulse Code Modulation
Connecting an HDMI device
One HDMI cable (type A connector)
For proper operation, it is recommended that you use a short
HDMI cable.
HDMI cable transfers both video and audio.
Note:
It is possible that some HDMI devices may not operate
properly with this TV.
Connecting a DVI device
One HDMI (type A connector)-to-DVI adapter cable and
audio cables
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-DVI adapter
cable should not exceed 3m. The recommended length is 2m.
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analogue audio cables are required.
Note:
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
VIDEO AUDIO
LR
IN
OUT
HDMI OUT
TV back view
TV right side view
HDMI device
VIDEO AUDIO
LR
IN
OUT
DVI
OUT
DVI device
TV back view
TV back view
Asia_4246XV550A.book Page 34 Tuesday, September 16, 2008 3:03 PM