Filter
Top Products
Recording Playback Editing
Introduction
Connections Basic Setup Function Setup Others
15EN
AV2
(
DECODER
)
AV1
(
TV
)
ANTENNA
OUT
IN
ANALOG
AUDIO OUT
AUDIO IN
(
AV3
)
COMPONENT
VIDEO OUTPUT
S-VIDEO
COAXIAL
L
R
L
Y
P
B/CB
PR/CR
R
IN
(
AV3
)
OUT
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
12 4 53
6 7 8 9 10 11
1. ANTENNA IN jack
Connect to an antenna or cable.
2. AV2 (DECODER) socket
Connect to VCR, camcorder, or other Audio-Video
equipment.
Use a commercially available Scart cable.
3. COMPONENT VIDEO OUTPUT jacks
Connect to the component video input jacks on your
TV.
Use a commercially available Component Video
cable.
4. ANALOG AUDIO OUT jacks
Connect to the audio input jacks on your TV.
Use a commercially available Audio cable.
5. Mains cable
Connect to a standard AC outlet.
6. ANTENNA OUT jack
Connect to the Aerial jack on your TV, cable box or
direct broadcast system.
Use the supplied RF cable.
7. AV1 (TV) socket
Connect to the Scart socket on your TV.
Use a commercially available Scart cable.
8. S-VIDEO OUT jack
Connect to the S-Video input jack on your TV.
Use a commercially available S-Video cable.
9. S-VIDEO IN (AV3) jack
Connect to the S-Video output jack on your VCR,
camcorder or other equipment.
Use a commercially available S-Video cable.
10. AUDIO IN (AV3) jacks
Connect to the audio output jacks on your VCR,
camcorder or other Audio-Video equipment.
Use a commercially available Audio cable.
11. DIGITAL AUDIO OUTPUT PCM/BITSTREAM
(COAXIAL) jack
Connect to an amplifier with a digital input jack such
as a Dolby Digital decoder or DTS decoder.
Use a commercially available Coaxial cable.
Rear Panel
Notes
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the
unit.
• This unit does not have the RF modulator.