Filter
Top Products
Recording Playback Editing
Introduction
Connections Basic Setup Function Setup Others
5EN
■ CLEANING THE UNIT
● Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
■ CLEANING DISCS
● If a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the centre out. Do not
wipe in a circular motion.
● Do not use solvents such as benzine, thinners,
commercially available cleaners, detergent,
abrasive cleaning agents or antistatic spray
intended for analogue records.
■ DISC HANDLING
● Handle the disc by its edge so that fingerprints and
dust do not adhere to the disc surfaces.
● Always store the disc in its protective case when it
is not used.
■ SERVICING
● If the unit becomes inoperative, do not try to correct
the problem by yourself. There are no user
serviceable parts inside. Turn the unit off, unplug
the mains cable, and consult your dealer or an
authorized service centre.
■ CLEANING THE DISC LENS
● If the unit does not perform correctly even though
you have referred to “Troubleshooting” and the
relevant sections in the Owner’s Manual, the laser
optical pickup unit may be dirty. Consult your
dealer or an authorized service centre for
inspection and cleaning of the laser optical pickup
unit.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Dolby Digital Recording
“Dolby
®
Digital Recording enables consumers to record high-quality video with stereo sound on recordable
DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space,
allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby
Digital Recording will play back on all DVD-Video players.”
Note:
This is true when the players are compatible with actual recordable DVD discs.
Maintenance