Filter
Top Products
Recording Playback EditingIntroduction Connections
Basic Setup
Function Setup Others
Basic Setup
31EN
Setting the clock
Auto Clock Setting
Channel Tuning must be set before setting Auto Clock.
1) In stop mode, press [SETUP].
2) Select “Clock” using [K / L], then press
[ENTER].
Clock menu will appear.
3) Select “Auto Clock Setting” using [K / L], then
press [ENTER].
Option window will appear.
4) Select “ON” using [K / L], then press [ENTER].
5) Press [SETUP] to exit.
6) Press [I/
y ON/STANDBY] to turn off.
The Auto Clock function is activated.
This unit will search for the time only when the
power is off. Leave the unit off for several minutes
to give it time to set the clock.
Clock
Clock Setting
Auto Clock Setting
ON
Setup
Playback
Display
Recording
Clock
Channel
Disc
Required Setting
Notes
• If you want to cancel “Auto Clock Setting”, select “OFF”
using [K / L] at step 4, and then press [ENTER].
• The default setting of “Auto Clock Setting” is “ON”.
• The clock may set itself automatically after you connect
the antenna cable to the unit and plug in the mains cable.
In this case, the current time will appear on the front panel
display.
• To set the clock automatically, the channel assigned to
“P04” must receive the PDC signal.
• The clock cannot be set automatically if you are not
receiving a channel in your area that carries a time signal.
In this case, set the clock manually.
• Once the auto clock setting is performed, the unit will
correct the current time by receiving PDC broadcasts
whenever you turn off the unit.
• The unit will correct the current time automatically at 8:00,
if the unit power is turned off.
• Between 23:00 and 1:00, the Auto Clock function will not
operate even if the unit power is turned off.
Manual Clock Setting
1) In stop mode, press [SETUP].
2) Select “Clock” using [K / L], then press
[ENTER].
Clock menu will appear.
3) Select “Clock Setting” using [K / L], then press
[ENTER].
Clock Setting menu will appear.
Press [ENTER] again.
Default date will appear.
Clock
Clock Setting
Auto Clock Setting
ON
Setup
Playback
Display
Recording
Clock
Channel
Disc
Required Setting