Filter
Top Products
Recording
Recording
Playback EditingIntroduction Connections
Basic Setup
Function Setup Others
55EN
Settings for an external equipment
Connection to an external equipment
1
In stop mode, press [SETUP].
2
Select “Required Setting” using [K / L], then
press [ENTER].
Required Setting menu will appear.
3
Select “Select Video” using [K / L], then
press [ENTER].
4
Select the input jack type to be used using
[K / L], then press [ENTER].
<e.g. AV4 (Front)>
• If you want to use VIDEO input jack (Composite), select
“Video In”.
• If you want to use S-VIDEO input jack, select “S-Video In”.
5
Press [SETUP] to exit.
Connect the external equipment using either the input jacks, AV1, AV2, AV3 (Rear) or AV4 (Front). However, for AV4
jacks, you have to select S-VIDEO input or VIDEO input jack depending on the connected devices.
Use a commercially available Scart, S-Video or Video cable and an Audio cable for this connection.
Select Video
TV Aspect
Required Setting
Video In
4 : 3 Letter Box
Select Video - AV4 (Front)
S-Video In
Video In
Start
Setup
Playback
Display
Recording
Clock
Channel
Disc
Required Setting