Filter
Top Products
Basic Setup
28 EN
Initial setting
You need to follow these steps when you turn this unit
on for the first time.
1) Press [I/y ON/STANDBY].
2) Turn the TV on. Select the input to which the
unit is connected.
Initial Setting menu will automatically appear.
3) Press [ENTER] to start Channel Tuning.
The unit will start getting channels available in your
area.
4) After channel setting is finished, “Clock
Setting” will appear. Then press [ENTER].
Clock Setting menu will appear.
5) Press [ENTER] again, then follow the steps 4 to
5 on page 32 in “Manual Clock Setting”.
Initial Setting
Channel Tuning
Initial Setting
Clock Setting