Filter
Top Products
PREPARATION
17
Initial Settings - DVD
By using the DVD Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the Setup
menu, among other things. For details on each Setup
menu item, see pages 17 to 20.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General Operation
1. Press DVD on the remote control.
2. Press SETUP.
The Setup menu appears.
3. Use v / V to select the desired option then press B
to move to the second level. The screen shows the
current setting for the selected item, as well as alter-
nate setting(s).
4. Use v / V to select the second desired option then
press B to move to the third level.
5. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
6. Press SETUP or PLAY (N) to exit the Setup menu.
LANGUAGE
Menu Language
Select a language for the VCR and DVD’s setup menu
and information display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track (disc
audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press number but-
tons then ENTER to enter the corresponding 4-digit
number according to the language code list in the refer-
ence chapter (see page 37). If you enter the wrong lan-
guage code, press CLEAR.
Off (for Disc Subtitle) : Turn off Subtitle.
DVD