Filter
Top Products
28
Operation with tape (Continued)
Additional VCR Information
• During manual recording, timer recording,
One-touch Timer Recording, playback, or fast forward
modes, the DVD+VCR automatically starts rewinding
the tape at the end of the tape. The cassette stops at
the beginning of the tape and is ejected.
• After you have finished using the DVD+VCR,
rewind, eject, and remove the cassette. Place the
cassette in its protective sleeve to protect it from
dust. It is not necessary to rewind the cassette
before removing it, but if you do, it is ready to play
or record the next time you use it.
• Be sure the DVD+VCR channel selector is on the
correct channel you wish to record. The channel that
is being recorded can always be checked by setting
the television on the DVD+VCR channel (CH 3 or 4)
and pressing the TV/VCR to turn the DVD+VCR’s
TV indicator off.
• Do not attempt to hook up more than one television
set to the DVD+VCR for either recording or play-
back.
VCR Auto Play System
This DVD+VCR features automatic playback.
When you load a tape with the safety tab removed the
following occurs:
• The Output Source is changed to VCR mode
automatically.
• The power turns on automatically and playback begins.
• At the end of the tape, the DVD+VCR stops, then rewinds.
• The tape is ejected after rewinding and the turns itself off
automatically.
Note:
Auto power off does not function during regular DVD play
mode. (DVD+VCR power stays on.)
S-VHS Quasi Playback (SQPB)
• This DVD+VCR can play back S-VHS recorded
tapes, however, it cannot make recordings using S-
VHS format tapes.
• SQPB is an abbreviation for S-VHS Quasi Playback.
Easy Information
If the Extended Data Service (XDS) signals are provid-
ed along with normal TV signal in your area or during
playback of a tape recorded with Extended Data
Service (XDS) signals, the station ID, program title, and
program details are shown on the TV screen.
When
viewing a channel with Extended Data Service (XDS) sig-
nals, press ENTER and the station ID will appear on the TV
screen. Press ENTER again and the program details will
appear on the TV screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER twice and the pro-
gram title and program details will appear on the TV
screen.
Program Details
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program (N/A,
G, PG, PG-13, R, NC-17, X and Not Rated). The rating
N/A means that the motion picture ratings are not applica-
ble to this program.
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
CH 4
SP WABC STEREO
“Home video”
APR 30 , SAT 2:15 PM
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A