Filter
Top Products
OPERATION
25
Operation with tape (Continued)
CHANNEL: Select a TV channel, LINE1 or LINE2. If
you have CABLE TV and use a cable box (convert-
er) you must set the channel to match the cable box
output channel (usually CH 3 or 4). Change chan-
nels on the cable box instead of with the DVD+VCR.
If you use a cable converter, you can program multi-
ple recordings only on the converter box output
channel. This is because the converter determines
what channel you view through your DVD+VCR.
SPEED: AUTO mode determines how much tape is
left and switches the speed from SP to SLP if it is
necessary to complete recording the program. If this
occurs there could be some picture and sound dis-
tortion at the point where the speed changes.
REPEAT: To record up to 8 programs on a certain
day of every week select WEEKLY. To record up to
8 programs at the same time Monday through Friday
select DAILY. Otherwise select ONCE.
7. Press VCR MENU and the program is memorized
by the DVD+VCR.
8. Additional programs may be entered by repeating
steps 1-7.
9. Ensure you insert a tape with the record safety tab
intact before the first programmed time.
10.Press STOP (x) to end timer recording.
Notes:
• If you make a mistake or want to change a setting, use v
to select the option and correct it using b/B.
• If the program preset time is past, the “PAST TIME
PROGRAMMED” message appears on the TV screen.
Return to the incorrect program and program it with the
correct time.
• If you enter a past date, the timer recording will be
performed on that date of the next year.
• If the power fails or the DVD+VCR is unplugged the clock
and timer settings are kept in memory for only 3 seconds.
Otherwise you must reset the clock and timer.
•If the tape indicator is blinking, no tape is loaded.
• When you are playing DVD at programmed Recording
time, the DVD+VCR automatically change to VCR mode
and start recording.
• The DVD+VCR will automatically power off when Timer
Recording ends.
• The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs and other materi-
als, is prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil
and/or criminal liability.
Checking or Erasing the Timer Program
Programming can be checked whenever the DVD+VCR
is turned on.
1. Press VCR MENU and the MAIN menu appears.
2. Use v/V to choose the PROGRAM menu and press
ENTER.
3. Use b/B to select a program you want to check or
erase. To erase the program, press CLEAR.
4. Press VCR MENU to return to the TV screen.
Program Priority
If the recording start and end times of preset programs
overlap on the same day (see the example), the second
program is not recorded until the first is finished.
In this example, the first part of program numbers 2 and
3 are not recorded.