Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
38
SOURCE
Note:
• The PIP buttons on the remote control
operate the TV’s POP features.
• You cannot access POP features when
viewing ColorStream HD1/HD2, DVI, or
PC IN input.
• You cannot display an ANT-2 signal source
in the POP window.
• You can output the sound of either the
main or POP program from the AUDIO
OUT jacks (see “Selecting the AUDIO OUT
sound” on page 56).
PIP
PIP CH yz
Using the POP double-window feature
The POP (picture-out-picture) feature splits the screen into a double
window that allows you to watch two programs at the same time. The
POP program can come from a TV broadcast or an external source,
such as a VCR.
To display a TV broadcast in the POP window:
1. Press PIP to display the POP window.
POP
12
2. Press PIP CH yz to change the channel of the POP window.
If the V-CHIP feature is active and you try to watch a TV
program that exceeds your set rating limits, the program will be
blocked (see “Using the V-CHIP menu” on page 41).
POP
BLOCKED
24
To display a picture from an external source in the POP window:
1. Connect the external source equipment (see “Connecting your
TV” on pages 8–18).
2. Select the TV program you want to watch in the main window.
3. Press PIP to display the POP window.
4. Press SOURCE to display the POP SOURCE SELECTION
window. Select the desired input source by pressing the
corresponding number button (0–3). The current source displays
in purple.
12345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
POP SOURCE SELECTION
TV
1VIDEO
VIDEO 2
VIDEO 3
0–3 :TO SELECT
0:
1:
2:
3:
You can view a video tape as the POP picture, or select a channel
for the POP window using the VCR’s channel keys.
To close the POP window:
Press PIP again.
POP windowMain window
57HLX82(E)32-40 10/29/02, 10:28 AM38