Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
60
1. Turn off the TV and unplug the power cord.
How to replace the lamp unit
3. On the back of the TV, loosen the thumb screw (by hand) on the
lamp unit door, and then remove the lamp unit door.
2. STOP! Allow the lamp to cool for at least one (1) hour
before replacing it.
TV back
4. Using a manual flathead screwdriver, loosen the screw on the
lamp unit.
Lamp unit screw
(Continued on next page)
Required tool: Manual flathead screwdriver
WARNING: The lamp unit door is provided with
an interlock to reduce the risk of electric shock and
excessive ultraviolet radiation. Never defeat its purpose
or attempt to service without removing the lamp unit
door completely. Failure to follow this WARNING may result
in death or serious injury.
The temperature of the lamp immediately
CAUTION: HOT SURFACE
WARNING: Eye damage may result from
directly viewing the light produced by this
lamp. Always turn off the TV and unplug the power cord before
opening the lamp unit door.
Thumb
screw
Lamp unit door detail
WARNING: RISK OF
ELECTRIC SHOCK!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
NEVER REMOVE TV COVERS, EXCEPT AS
SPECIFIED HEREIN. REFER ALL SERVICING
NOT SPECIFIED IN THIS MANUAL TO
QUALIFIED SERVICE PERSONNEL. Failure
to follow this WARNING may result in death
or serious injury.
after use exceeds 392°F (200°C). Touching the lamp at this
temperature will result in injury. ALLOW THE LAMP TO COOL
FOR AT LEAST ONE (1) HOUR BEFORE REPLACING IT.
57HLX82(E)59-70 10/29/02, 10:29 AM60