Filter
Top Products
61
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Lamp unit screw
(hand-tighten only)
7. Using a manual flathead screwdriver, replace the lamp unit screw.
Note: Hand-tighten only. Do not use an electric screwdriver.
How to replace the lamp unit (cont.)
5. Grasp the lamp unit handle and gently pull the lamp unit straight
out of the TV. Set the old lamp unit aside (see “Lamp unit
disposal” on page 62).
6. Carefully insert the new lamp unit straight into the TV until it is
fully seated. The lamp unit is fully seated when the two plastic
“nubs” on the TV cabinet are flush with the two holes in the
lamp unit (above and below the lamp unit screw hole; see
illustration below).
Fully seated lamp unit
(two plastic “nubs”
on TV cabinet are flush
with two holes in lamp
unit).
(Continued on next page)
Note:
• Never subject the lamp unit to excessive shock.
• Never touch the lamp unit glass or otherwise get it dirty.
Doing so may affect the image quality and reduce the service life
of the lamp. See “Cleaning the lamp unit glass” at right.
NOTE: Make sure the lamp unit and screw are
installed securely; otherwise, the TV may not turn on
and the lamp life may be shortened.
Cleaning the lamp unit glass
If you accidentally touch the lamp
unit glass or otherwise get it dirty,
wipe it with a lint-free lens cleaning
cloth (such as a cloth for cleaning
camera lenses or eyeglasses).
CAUTION: NEVER clean a
hot lamp with any type of
flammable liquid or aerosol cleaning
agent. Many ordinary cleaning agents (such
as glass cleaners) contain chemicals that may
be flammable at certain temperatures. If the
lamp unit is not allowed to cool for at least
one (1) hour, such chemicals may ignite.
57HLX82(E)59-70 10/29/02, 10:29 AM61