Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
56
yzx •
MENU
Selecting the AUDIO OUT sound
This feature allows you to select the sound source (MAIN or POP)
that is output from the AUDIO OUT terminals.
This is useful when amplifying or recording the POP sound with
external equipment while hearing the sound of the main picture
through the built-in speakers. See “Connecting an audio system” on
page 17.
To select the Audio OUT sound:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight AUDIO OUT.
3. Press x or • to select MAIN or POP.
AUD OI
SBS
SBS LEVEL
ON
ON
OFF
100
ON
/
SPEAKERS
AUD O OUTI
STABLE
DVI
OPTICAL
COAXIAL OFF
SOUND
MA I N/POP
• MAIN: Outputs the sound of the main program through the
AUDIO OUT terminals.
• POP: Outputs the sound of the POP program through the
AUDIO OUT terminals.
Using the StableSound
®
feature
The StableSound
®
feature limits the highest volume level to prevent
extreme changes in volume when the signal source is changed (for
example, to prevent the sudden increase in volume that often happens
when a TV program switches to a commercial).
To turn on the StableSound
®
feature:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight STABLE SOUND.
3. Press x or • to highlight ON.
AUD OI
SBS
SBS LEVEL
ON
ON OFF
80
ON
ON
/
SPEAKERS
AUD O OUTI
STABLE
DVI
OPTICAL
COAXIAL OFF
SOUND
POP
To turn off the StableSound
®
feature:
Highlight OFF in step 3 above.
Note:
Make sure the volume control of your audio
amplifier is set to a moderate listening level.
57HLX82(E)51-58 10/29/02, 10:29 AM56