Filter
Top Products
49
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Selecting the video input source
Press INPUT on the remote control or TV/VIDEO on the TV to view
a signal coming from another device connected to your TV, such as
aVCR or video disc player (see illustrations below). You can select
ANT 1, VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1,
ColorStream HD2, DVI, PC IN, or ANT 2 depending on which input
terminals are used to connect your devices (see “Connecting your TV”
on pages 8–18.)
SOURCE SELECTION
0: ANT 1
1: VIDEO 1
2: VIDEO 2
3: VIDEO 3
4:
5:
ColorStream HD1
ColorStream HD2
6: DV I
7: PC I N
8: ANT 2
0-8: TO SELECT
SOURCE SELECTION
0: ANT 1
1: VIDEO 1
2: VIDEO 2
3: VIDEO 3
4:
5:
ColorStream HD1
ColorStream HD2
6: DV I
7: PC I N
7: ANT 2
TV/VIDEO : TO SELECT
Labeling the video input sources
The video label feature allows you to label each input source for your
TV from the following preset list of labels:
–: Uses the default label name
VCR: Video cassette recorder
DVD: DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD : DVI/HDCP device (see page 15)
To label the video input sources:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight VIDEO LABEL.
CUSTOM
TIMER 000
CC C2
FAVORI CH
C1
1TE
FAVORI CH2TE
VI
DEO
CH
LABEL
LABEL
ING
3. Press x or • to display the VIDEO LABEL menu.
4. Press y or z to highlight the video source you want to label.
5. Repeatedly press x or • to select the desired label for that input
source.
CUSTOM
IV DEO
I1V DEO
I2V DEO
I3V DEO
HD1
LABEL
VCR/DVD/DTV /SAT CBL/
–
–/
–
–
–
CUSTOM MENU
Color Stream
HD2
Color Stream
DVI
–
6. Finish labeling the other video sources as desired. To return to the
previous menu, press y or z to highlight CUSTOM MENU,
and then press x or •.
7. To exit the menu, press EXIT.
Note:
• When ColorStream HD1/HD2, DVI, or
PC IN is selected, the VIDEO OUT jack
does not output a signal. To receive a
VIDEO OUT signal, use a standard video or
S-video IN connection instead.
• If you select ColorStream HD1/HD2, DVI,
or PC IN while the POP picture is active, the
POP window will close.
TV/VIDEO
MENU
yzx •
EXIT
INPUT
Pressing INPUT on the remote control
displays the current signal source
(press INPUT again or 0–8 to change)
Pressing TV/VIDEO on the TV
changes the current signal source
Note:
The HD (high-definition) label is available for
DVI mode only (see “Selecting the video
input source” above, and “Connecting a
device to the DVI/HDCP IN terminal” on
page 15.
MENU VOLUME CHANNEL EXIT TV/VIDEO
Control touchpad on TV front
57HLX82(E)46-50 10/29/02, 10:28 AM49