Filter
Top Products
6-36 Acutime 2000 Synchronization Kit User Guide
NTP Software Installation and Configuration
6
NTP is Communicating with the Acutime NTP Reference
Clock
The Acutime NTP reference clock is identified in the list as
GPS_ACUTIME. The data indicates that the Acutime GPS is selected as
reference clock, that it was last polled 61 seconds ago, and that it has
responded to each of the last 11 polls. The offset between the system
clock and UTC is 17 microseconds, with a jitter of 2 microseconds.
The use of the rv command is also shown above. It reveals more
information about the reference clock source in use by NTP.