Filter
Top Products
Acutime 2000 Synchronization Kit User Guide A-113
A Trimble Standard Interface Protocol
0x8F-4D
Report Packet 8F-4D
Automatic Packet Output Mask
This packet provides information on the automatic packets that may
be output by the receiver. Sent in response to 8E-4D query or set.
A "0" in the bit position means that automatic output of the associated
packets is disabled; a "1" in the bit positions means that the associated
packets can be automatically output. The following table describes
the meaning and packets output by each set bit.
Table A-94 Report Packet 8F-4D
Byte # Item Type Meaning
0 Subcode BYTE ID for this sub-packet is always 0x4D
1-4 Bit Mask ULONG Bits in the mask enable output packets
Table A-95 Report Packet 8F-4D
Bit # Output
Packets
When Output Meaning
0(LSB) 40 Alm After Decode Almanac data collected from
satellite
1 58, 5B After Decode Ephemeris data collected from
satellite.
2 4F After Decode UTC data collected from satellite
3 58 After Decode Ionospheric data collected from
satellite
4 48 After Decode GPS Message.
5 49 After Decode Almanac health page collected
from satellite.
6 Reserved
7 Reserved
8 41 New Fix Partial and full fix complete and
packet output timer has expired.