Filter
Top Products
6-8 Acutime 2000 Synchronization Kit User Guide
NTP Software Installation and Configuration
6
6.4 Time Transfer Cable Connection
The serial port of the host computer serves as a precision
synchronization interface between NTP and the Acutime smart
antenna.
Connect Port A on the Acutime Synchronization Interface Module, to
the NTP time server’s serial port, as shown in Figure 6-1. Trimble
provides a standard DB-9 serial cable with the Acutime NTP
Synchronization Kit.
!
Note – If your network host’s serial port is not a standard DB-9 serial
connector, you need an appropriate converter. Ensure that proper
Ground, Request To Send, Data Transmit and Data Receive
connections are supported by the converter.
Figure 6-1 Time Transfer Connection Diagram
Synchronization
Interface
Module
Wall Power
To PC
Serial
Port
Actutime
PPS Port A Port B