Filter
Top Products
Timer Recording
25
Setting up the starting time of recording:
In the “Item Editor” dialog box, use the arrow buttons and the “OK” button to highlight the “Start” option. Enter a value
between 0:00 and 23:59 with the number buttons and press the “OK” button to confi rm. This function is used to set up
the starting time of the recording. If the input value is beyond the range of 0:00-23:59, the system will give an invalid
message.
Setting up the end time of recording:
Setting up the end recording time is similar to setting the starting time, as described in the above section. In the “Item
Editor” dialog box, use the arrow buttons and the “OK” button to highlight the “End” option. Enter a value between
0:00 and 23:59 with the number buttons and press the “OK” button to confi rm. This setting means when the end time
is reached, the recording process will be stopped and the unit turns to standby status.
Record To source:
You may choose to record directly to a disc or the hard disc drive.
Setting up the record title:
Use ▲ or ▼ arrows to change the letter and press the “OK” button to enter it.
To delete a set timer recording:
Select any timer recording item and press the “ADD/CLEAR” button to delete it.
Notes:
• After setting up the timer recording schedule, confi gure the system according to the schedule and make sure the
system is in standby or working status.
• If the system is conducting another operation 5 minutes before the scheduled recording time, an information box
will pop up prompting you whether to start recording or not. If you still want to record, highlight press the “OK”
button to confi rm. If the information box is left unattended, the system will automatically record.
• If the system is in standby status, it will enter the recording mode automatically 3 minutes in advance and start
recording following the set schedule.
• After completing the recording, the system will restore the status before the recording automatically.
• The system must be properly confi gured with the set values before completing expected recording(s).
• Select any timer recording item and press the “ADD/CLEAR” button to delete it.
• Do not use a fi nalized DVD+/-R disc.