Filter
Top Products
Play Mode
27
OPERATION
Auto Play - Pre-Recorded Discs
1. Press the “EJECT” button to open the disc tray.
2. Insert the available disc.
• Do not put the disc upside-down. The smooth side should face downward, while the printed side should
face upward.
3. Press the “EJECT” button to close the disc tray. The system will start playing.
Enter Title Before Playing
This function is only available with DVD discs.
1. Press the “MENU” button and the title directories will appear on the screen.
2. Press the arrow buttons to move the cursor to a desired title. For some discs, you can input numbers to select a
title directly.
• For example, to select Title 2, press 2; to select Title 20, press 2-0.
3. Press the “OK” button to play the selected title.
Notes:
• Title directories of different DVD discs may vary to some extent.
• Some DVD discs might not have any title directory. For such discs, do not press the "OK" button.
Enter Menu Before Playing
1. Press the “MENU” button.
• The Menu Picture of the DVD disc will be displayed on the TV screen.
• For SVCD and VCD discs, this button auto detects PBC ON/OFF function.
• This function will occur only in the Pre-stop status for some discs.
2. For DVD discs, press the arrow buttons to select a chapter; for SVCD and VCD 2.0 discs, press the number
buttons to select a track.
• The “OK” button must be pressed before playing for some discs.
3. Press the “RETURN” button to play.
• For SVCD and VCD 2.0 discs, system will return to menu while PBC is on; the function will not be
available while PBC is off.
End Play
1. Press the “STOP” button.
• The system will change to the Pre-stop status.
• In the Pre-stop status, the unit will automatically record the stopping time.
• Pressing the “PLAY” or “RETURN” button, the unit will playback from the recorded stopping time. (For
MUSIC discs, playback will start from the beginning of the track at pre-stop time.)
• Press the “STOP” button again, the system will change to Stop status and the memory will be cleared
then.
2. Press the “EJECT” button to open the disc tray.
3. Take out the disc.
4. Press the “EJECT” button to close the disc tray.
5. Press the “POWER” button to standby the unit.
Note: If the disc is incorrectly inserted or the disc is seriously damaged the OSD will display “NO DISC”