ULEAD DVD MOVIEFACTORY USER GUIDE 13
DVD MovieFactory
Multi-trim Video
Multi-trim Video lets you select multiple segments from a video and extract these
segments to the Media Clip list.
To use Multi-trim:
1. Select the video to be trimmed in the Media Clip list.
2. Click to open the Multi-trim Video dialog box.
3. Drag the Jog Slider to locate the start of the segment to retain, and then click
or press [F3].
4. Drag the Jog Slider to locate the end of the segment to retain, and then click
or press [F4]. The extracted segment will be added to the Media Clip list.
5. To select more segments, repeat steps 3 and 4.
6. Click Play (or press [Space]) to view the trimmed video.
7. To remove any extracted segment from the list, select it in the Media Clip list
and click Remove selected clips. You can also click Invert Selection to select
all unmarked segments instead.
8. Click OK.
To remove any extracted segment from the list, select it in the Media Clip list and
click Remove selected clips. You can also click Invert Selection to select all
unmarked segments instead.
Note: If the video is previously edited by Enhance Video, you must first right-click
the video and select Reset Enhanced Video before you can multi-trim the clip.
Tip: To move the Jog Slider at a fixed interval, use or . Set the quick search
interval in Duration.