Filter
Top Products
MAIN
BUTTON
UP & DOWN
CURSOR
HIGH
CONTRAST
LOW
CONTRAST
31 32
SimpleSound Setup &
Other "Punch Throughs"
CUSTOMIZING
CUSTOMIZING
Setting Backlight Options
NOTE: If you want to PUNCH TO the MAIN
Component, press the POWER OFF button
at this time.
NOTE:The Punch Through feature is not
limited to volume and can also be applied
to channel selection or other functions. If
you find yourself switching to a particular
Component frequently to use a group of
controls, consider using Punch Through for
another group, as listed here:
VOL Volume Up,Volume Down
and Mute
CH Channel Up, Channel Down,
Previous Ch and Channel
(0-9) buttons.
PLAY Play, Stop, Pause, Rewind
and Fast Forward
VOD Guide, Menu, Info, Exit, Up,
Down, Left, Right, Select
The bottom of the display flashes
“PUNCH TO”. Press the button
for the Component that doesn’t
have volume control commands
yet (i.e.,DVD). This is the
Component you are going to
PUNCH TO for the volume and
mute commands.
STEP 5:
The bottom of the display will
then flash “PUNCH FROM”. Now
select the Component that has
the volume commands you want
to use (i.e.,TV for systems using
the TV speakers, AUDIO for sys-
tems with surround sound
receivers). The bottom of the dis-
play will flash “SAVED”.
STEP 6:
Repeat STEPS 4-5 until all your
Components operate the volume
perfectly.
STEP 7:
Press the MAIN button twice to
return to normal operating
mode and test your
SimpleSound™ settings.
Simply perform the steps outlined
above, but in STEP 4, press one
of the control options (CH, PLAY or
VOD).
Setting Backlight Options
You can customize the backlighting feature to suit your
specific preferences by following these simple steps:
Adjusting Length of Backlight Time
You can adjust the amount of time that the RF20 backlight
stays on by entering the SETUP mode and proceeding to
page 2 (using the PAGE (
) UP button), then pressing the
LIGHT display button on the LCD screen (not the Backlight
button). Then enter the amount of time you would like the
light to stay on using the number pad (0-99 seconds). After
making your selection, press the SAVE display button.
Adjusting Contrast
You can make the text darker by pressing both the MAIN and
cursor UP buttons at the same time. To make the text appear
lighter, press both the MAIN and cursor DOWN buttons at the
same time.
Turning OFF Backlighting
If you don’t want backlighting at all (this extends battery
life), press the ON display button that appears on the
screen. The ON will change to OFF. Press the SAVE display
button. Exit the setup mode by pressing the MAIN button.