Filter
Top Products
10 ViewSonic VPW505
Powering ON / OFF
Using Front Panel or Remote Control
1. Confirm the display is plugged into the wall outlet
and the main AC switch located in the rear of the
display is switched to the ON position. If the
power is plugged in and the AC switch is on, the
STATUS LED will illuminate a solid yellow color.
2. Press the POWER button on the front panel or the
remote control.
3. The display will now turn on after a brief pause.
The STATUS LED will now turn green to indicate
power on status.
4. To turn power off, simply press the POWER but-
ton on the front panel or the remote control once
again.
Using Discrete Power ON/OFF Keys
1. The discrete POWER ON/OFF keys sends two dis-
crete signals to the display.
2. To turn power on, simply press the POWER ON
button. If the display is turned on already, pressing
this button will have no effect.
3. To turn off power, simply press the POWER OFF
button. If the display is already turned off, press-
ing this button will have no effect.
Selecting Signal Source
Using Front Panel or Remote Control
1. Press the INPUT key on the front panel or the
INPUT SELECT key on the remote control.
2. Pressing the INPUT key will cycle the display thru
all available input signal sources in the following
order:
Using Direct Input Selection Keys
1. If you prefer not to cycle thru all available inputs,
you can use the Direct Input Selection keys located
towards the bottom of the remote control.
2. Simply select the input that you would like to
switch to and press the Direct Input Selection key
for that input.
Notes:
Some of the Direct Input Selection keys will not be
applicable for this display.
For AV mode, use AV1.
For S-Video, use AV2.
OPERATING THE DISPLAY-BASICS
Input Select
(Toggle)
Direct Input
Selection Keys
POWER(Toggle)
Status LED
Not Illuminated - No AC
Power detected
If the main power switch
(rear of panel) is turned off,
this LED will not illuminate.
Solid Yellow - Standby
(Power OFF) with AC
power detected
The LED will illuminate in
yellow color if the display is
shut-off but the main power
cord is plugged into the back
of the unit.
Solid Green - Power ON
Discrete
POWER ON/OFF