Filter
Top Products
Chapter 11 Packages
Media Server User’s Guide
227
11.3.1 SMART Brief Summary
Use this screen to display information about the volume, such as the hard disk vendor, specific
model, hard disk capacity and so on.
Click Brief Summary in the Storage > S.M.A.R.T screen to display the following.
Figure 106 Storage > S.M.A.R.T: Brief Summary
The following table describes the labels in this screen.
Table 55 Storage > S.M.A.R.T: Brief Summary
LABEL DESCRIPTION
Brief Summary
Temperature This shows the current temperature of the hard disk in degrees celsius.
Health This describes the overall health of the volume based on S.M.A.R.T diagnostics.
Performance This shows your hard disk’s performance. Refer to Section 11.3.2 on page 228 for more
information on how S.M.A.R.T determines your hard disk’s condition. This displays:
• Good - This shows when you compare each Value with the Threshold Value and
all the Value is greater than the Threshold Value.
• Bad - This shows when you compare each Value with the Threshold Value and at
least one Value is less than or equal to the Threshold Value.
Detailed Information
Model Family This shows the vendor and product family of the hard disk.
Device Model This shows the factory model of the hard disk.
Serial Number This shows the serial number of the hard disk.
Firmware Version This shows the firmware version installed in the hard disk.
User Capacity This shows the total hard disk space of the hard disk volume.
ATA Version This shows the ATA version of the hard disk, which refers to an industry standard
category for storage devices and connectors used.
ATA Standard This field displays the Advanced Technology Attachment standard the hard drive
supports.
Local Time This field displays the local time that the hard drive is using.
SMART support This field displays whether or not the hard drive is SMART-capable.
SMART support This field displays whether or not the hard drive has SMART monitoring turned on.
OK Click this to close the window.