Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 119
debug ip dns-client
Use the debug ip dns-client command to activate debug messages associated with domain naming system
(DNS) client operation in the AOS. Debug messages are displayed (real time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 3.1 Command was introduced.
Functional Notes
The debug ip dns-client command activates debug messages to provide information on DNS client
activity in the AOS. The IP DNS capability allows for DNS-based host translation (name-to-address).
Usage Examples
The following example activates debug messages associated with DNS client activity:
>enable
#debug ip dns-client
