![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/c/3b/c3b8a554-6455-b5f4-6d07-3ea881a070a1/c3b8a554-6455-b5f4-6d07-3ea881a070a1-bg1f8.png)
Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 504
snmp-server contact <“string”>
Use the snmp-server contact command to specify the SNMP sysContact string. Use the no form of this
command to remove a configured contact.
Syntax Description
<“string”> Populates the sysContact string using an alphanumeric string enclosed in
quotation marks (up to 32 characters in length).
Default Values
By default, the snmp-server contact is set to Customer Service.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example specifies Network Administrator x4000 for the sysContact string:
(config)#snmp-server contact “Network Administrator x4000”