A SERVICE OF

logo

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 366
crypto ca profile <name>
Use the crypto ca profile command to define a CA and to enter the CA Profile Configuration. Refer to CA
Profile Configuration Command Set on page 1215 for more information.
Syntax Description
<name>
Creates a CA profile using an alphanumeric string (up to 32 characters).
Default Values
No defaults necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
Use this to specify the type of enrollment, as well as enrollment request parameters. Refer to the
Functional Notes of the command
crypto ca enroll <name> on page 361 for more information.
Usage Examples
The following example creates the CA profile called MyProfile and enters the CA Profile Configuration for
that certificate authority:
(config)#crypto ca profile MyProfile
Configuring New CA Profile MyProfile.
(ca-profile)#