A SERVICE OF

logo

Command Reference Guide ATM Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 721
atm routed-bridged ip
Use the atm routed-bridged ip command to enable IP routed bridge encapsulation (RBE) on an interface.
Use the no form of this command to disable RBE operation.
Syntax Description>
No subcommands.
Default Values
By default, routed bridge encapsulation is disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following example enables routed bridge encapsulation:
(config)#interface atm 1.1
(config-atm 1.1)#atm routed-bridged ip