Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 264
show port-auth [detailed | statistics | summary] [interface
<interface id>]
Use the show port-auth command to view port authentication information.
Syntax Description
detailed Displays detailed port authentication information.
statistics Displays port authentication statistics.
summary Displays a summary of port authentication settings.
interface <interface id> Displays port authentication information for the specified interface. Interface ID
consists of the interface type and ID number. Type show port-auth interface ?
for a list of valid interfaces.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000 and 1000R Series units.
Command History
Release 10.1 Command was introduced.
Usage Examples
The following example displays the port authentication information:
>enable
#show port-auth
Global Port-Authentication Parameters:
re-authentication enabled: False
reauth-period: 3600
quiet-period: 60
tx-period: 30
supp-timeout: 30
server-timeout: 30
reauth-max: 2
max-req: 2
