A SERVICE OF

logo

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 486
qos cos-map <cos queue id> <cos value 0> <cos value 1>...<cos val 7>
Use the qos cos-map command to associate cost of service (CoS) values with each queue.
Syntax Description
<cos queue id>
Specifies the queue number to which you are assigning CoS value(s).
<cos val 0>
Associates listed CoS values with a particular priority queue.
<cos val 1-7>
Optional.
Associates up to eight CoS values with the queue.
Default Values
By default, CoS 0 and 1 are mapped to queue 1; CoS 2 and 3 are mapped to queue 2; CoS 4 and 5 are
mapped to queue 3; CoS 6 and 7 are mapped to queue 4.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example maps CoS values 4 and 5 to queue 1:
(config)#qos cos-map 1 4 50