A SERVICE OF

logo

Open as PDF
next previous
1.
Align the protrusions on both edges of the 3.15 inches / 8 cm Disc Adapter with
indentations on the Disc Tray.
2.
Place the 3.15 inches / 8 cm printable disc on the Disc Tray with the printing
surface facing up.
4.
Attach the Disc Tray to the machine.
Note
The Disc Tray may be ejected after a specified period of time has elapsed. In this case,
follow the on-screen instructions to attach the Disc Tray.
5.
Insert the Disc Tray straight until the arrow ( ) on the Inner Cover is almost aligned with
the arrow (
) on the Disc Tray.
(D) Keep the Disc Tray level when inserting it.
(E) Align the arrow (
) on the Disc Tray with the arrow (
) on the Inner Cover.
Important
Do not insert the Disc Tray beyond the arrow (
) on the Inner Cover.
Page 751 of 1037 pagesAttaching/Removing the Disc Tray