A SERVICE OF

logo

Open as PDF
next previous
3.
Select
Device settings, then use the
OK
button to confirm the selection.
4.
Use the button to select Print settings, then use the
OK
button to confirm the
selection.
5.
Use the button to select Adjust disc print area, then use the
OK
button to confirm the
selection.
6.
Use the
button to select Right/left or Top/bottom and use the button to adjust the
print area.
You can adjust the printing area by 0.003 inches / 0.1 mm between -0.03 inches / -0.9 mm
and +0.03 inches / +0.9 mm.
7.
Use the
OK
button to confirm the selection.
Page top
Page 755 of 1037 pagesPrinting on the Disc Label