> Changing the Machine Settings > Changing the Machine Settings on the LCD
> LAN settings
U076
LAN settings
WLAN active/inactive
Activates/deactivates wireless LAN.
Wireless LAN setup
Selects the setting method for wireless LAN connection.
Note
You can enter this setting menu by following the procedure below:
1. Select Setup on the HOME screen.
2. Select Wireless LAN setup.
In this case, activate wireless LAN.
Easy setup
Select when you perform settings for wireless LAN manually using the Operation Panel of the
machine.
Note
If you perform settings for wireless LAN from the computer, refer to your setup manual.
Other setup
Select WPS, WCN, or Advanced setup. If you select WPS, select Push button method or PIN
code method according to the method your access point supports, then follow the on-screen
instructions. If you select WCN, you need a USB flash drive on which settings for wireless LAN
are saved. If you select Advanced setup, follow the on-screen instructions.
Confirm LAN settings
The list of wireless LAN settings of this machine is displayed on the LCD.
You can print the list from this setting menu.
WLAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items
Setting (IPv4) Setting (IPv6)
Connection
Active/Inactive Active/Inactive
SSID
Communication
mode
Infrastructure Infrastructure
Channel
Wireless LAN
security
Inactive/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
Inactive/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
IP address
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
Subnet mask
-
Subnet prefix
length
-
Default gateway
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
Page 835 of 1037 pagesLAN settings
