Chapter 3 47
Printing From A Memory Card
3 Specify the layout.
(1) Use [ ] or [ ] to specify the layout, then press [OK].
The following layouts can be selected.
4 Specify the paste method.
(1) Use [ ] or [ ] to select the pasting method.
If you select <Paste all> then press [OK], all photos saved on the memory card are
automatically pasted in the specified layout. Go to step 6.
If you select <Paste one by one> then press [OK], the photo selection screen is
displayed.
5 Paste photos one by one.
(1) Use [ ] or [ ] to display the photo to be pasted, then press [OK].
(2) Repeat step 1 to paste photos.
Press [Back] to cancel the last pasted photo.
Press [Stop/Reset] to cancel all pasted photos.
(3) Press [Color] after pasting all photos.
The print confirmation screen is displayed.
6 Start printing.
(1) Press [Color].
The machine starts printing.
<Bordered>: 2/4/8/Half/Half (w/lines)
<Borderless>: 2/4/8/Half/Half (w/lines)
<Album>: 4/right, 4/left
<Mixed>: 1/2/3
Note
z When you select <Borderless>, the media type cannot be set to <Plain
Paper>.
z You can select Mixed 1-3 only when the page size is set to <8.5" x 11"
(215.9 x 279.4)> or <A4>.
Note
Pasting cannot be done over multiple pages. When you finish pasting
photos for one page, print the page.
