A SERVICE OF

logo

Chapter 8 69
Printing Photos From A Wireless Communication Device
Performing Bluetooth Communication
The following describes how to print photo communicating Bluetooth mobile phones using the
optional Bluetooth unit BU-20. For performing Bluetooth communication, refer to the Bluetooth
User’s Guide. See also the manuals supplied with your Bluetooth compatible device.
1 Prepare to print.
(1) Turn ON the machine and load the paper in the Auto Sheet Feeder.
See “Loading Paper” on page 23.
2 Specify the necessary print settings.
See “Changing The Print Settings” on page 26.
3 Install the Bluetooth unit BU-20 to the Direct Print Port.
4 Display the Bluetooth settings screen.
(1) Press [Menu].
(2) Use [ ] or [ ] to select <Maintenance/settings>, then press [OK].
(3) Use [ ] or [ ] to select <Device settings>, then press [OK].
(4) Use [ ] or [ ] to select <Bluetooth settings>, then press [OK].
The Bluetooth settings screen is displayed.
5 Confirm or change the settings.
(1) Use [ ] or [ ] to select the item to set.
(2) Use [ ], [ ], [ ], [ ] to select the settings.
(3) Press [OK] after finishing all settings you need.
Note
z The blue lamp on the Bluetooth unit BU-20 lights if it is properly
installed.
z The Bluetooth settings screen does not appear until the Bluetooth unit
is installed.